Quality Low-ash powdered film Batch Off Release Agent prevents adhesion of unvulcanized rubber and forms elastic release film for all elastomers factory
Quality Low-ash powdered film Batch Off Release Agent prevents adhesion of unvulcanized rubber and forms elastic release film for all elastomers factory
Quality Low-ash powdered film Batch Off Release Agent prevents adhesion of unvulcanized rubber and forms elastic release film for all elastomers factory
Quality Low-ash powdered film Batch Off Release Agent prevents adhesion of unvulcanized rubber and forms elastic release film for all elastomers factory

Low-ash powdered film Batch Off Release Agent prevents adhesion of unvulcanized rubber and forms elastic release film for all elastomers

PRODUCT MODEL
SR-P20
country of origin
china
MOQ
1000
payment method
T/T

Product Details

Highlight:

Low-ash powdered film Batch Off Release Agent

,

Prevents adhesion of unvulcanized rubber Anti-tack agent for rubber

,

Forms elastic release film Tire release agent
Product Description
Detailed Specifications And Features
Batch off release agent is used to prevent adhesion between unvulcanized rubber sheets. It forms an elastic film on the surface without affecting performance and is suitable for all types of rubber.
Batch Off Release Agent SR-P20
Technical Introduction
SR-P20 is a low-ash, powdered film release agent composed of ultra-fine inorganic fillers, activators, and surface treatment agents. It is used to prevent the adhesion of unvulcanized rubber and rubber compound sheets during storage and processing.
The aqueous dispersion of SR-P20 exhibits excellent suspension stability; even at low dilution concentrations, it will not stratify or settle for several hours. This effectively prevents contact between the rubber sheet and settled sludge at the bottom during the film dipping and cooling process, avoiding the problem of hard lumps forming on the film surface after drying.
SR-P20 forms an elastic release film on the surface of the rubber sheet, providing good release performance and preventing dust generation. SR-P20 dissolves well into the rubber during subsequent mixing and vulcanization processes, without affecting its physical and chemical properties. SR-P20 does not produce troublesome foaming during use.
Application Areas
Used in the mixing process to prevent the adhesion of unvulcanized rubber and rubber compound sheets during storage and processing. Suitable for all elastomers.
Usage Guidelines
The recommended concentration of SR-P20 release agent is 3.5±1%, determined by the ambient temperature of the processing workshop, the composition of the rubber, and the viscosity of the compound.
Generally, in summer, a higher concentration should be used for some viscous rubbers, and vice versa. Hot water can accelerate the dispersion of the release agent in water; the dispersion time is approximately 30 minutes.
Fresh release agent dispersion should be added to the dipping tank from the mixing tank regularly. Maintain the liquid level of the release agent dispersion in the dipping tank at more than 2/3 of the total volume to avoid insufficient solution, excessive temperature, and improper cooling and dipping of the rubber sheets.
Technical Specifications
Composition Mixture containing ultra-fine inorganic fillers and activators
Appearance Light gray to light yellow powder
PH (2.5%) 8.0~11.50
Ash Content 49~57% (2h/950℃)
Solubility Stability Disperses in water and does not settle in the short term
Packaging
20KG/package, in composite paper bags.
Safety and Transportation
According to transportation regulations, release agent SR-P20 is classified as a non-hazardous material and should be transported as such. Proper use of this product will not cause any harm.
Storage
Release agent SR-P20 should be stored in a cool, dry place. Under these storage conditions, the shelf life is at least two years. The effective storage date is indicated below the production date on the packaging label.
Tags:

Excellent slip and mold release properties Tire release agent

Excellent degassing properties Tire release agent

Bright and smooth inner surface Tire release agent
Related Products
Quality Transparent Waterproof Tear-resistant PVC Mesh Tarpaulin and PVC Laminated Mesh Fabric for Agriculture Construction Factory Enclosures factory

Transparent Waterproof Tear-resistant PVC Mesh Tarpaulin and PVC Laminated Mesh Fabric for Agriculture Construction Factory Enclosures

High-transparency PVC laminated mesh tarpaulin: polyester mesh core with clear PVC films for waterproof, tear-resistant, durable performance. Flexible, easy to cut, heat-seal and weld. Ideal for greenhouse curtains, construction hoardings, factory partitions and protective covers. Custom thickness and width available.

Quality Rubber fender with UHMW-PE plate for yachts offering medium energy absorption and high abrasion resistance factory

Rubber fender with UHMW-PE plate for yachts offering medium energy absorption and high abrasion resistance

Rubber fenders with UHMW-PE plates offer medium energy absorption, high reaction force, and excellent abrasion resistance. Available for bow and side yacht applications with durable construction.

Quality Elastic Self-adhesive Thermal Conductive Pad with Thermal Conductivity 1.0 W/m-K to 9.0 W/m-K for Heat Dissipation factory

Elastic Self-adhesive Thermal Conductive Pad with Thermal Conductivity 1.0 W/m-K to 9.0 W/m-K for Heat Dissipation

Self-adhesive thermal pads with 1.0-9.0 W/m-K conductivity. Excellent elasticity fills air gaps, reduces thermal resistance, and improves heat dissipation in 5G, automotive, and industrial applications. No backing adhesive required.

Quality High-temperature Resistant and Oil-resistant FKM Fluororubber O-rings and Seals for Automotive Engine with Custom-shaped Parts factory

High-temperature Resistant and Oil-resistant FKM Fluororubber O-rings and Seals for Automotive Engine with Custom-shaped Parts

FKM Fluororubber O-rings and seals offer exceptional high-temperature and oil resistance for automotive engines. With 66% fluorine content, superior tensile strength (12 MPa), and easy molding properties, they ensure reliable performance and durability in demanding applications.